External Scaling Cables

Pace offers external ‘INP Cables’ to implement additional voltage ranges for the XR5-SE or the XR440.  Each INP Cable (except the 4-20 ma cable) has an input impedance of approximately 100 kohms.
XR5 wiring and setup details see XR5-SE User's Guide page 87.

Scaling Cables  ·  XR5-SE

Model Configurable Ranges Price
INP/2 ± 2.5 Vdc
± 5.0 Vdc
0 - 10 Vdc
-2.5 to 7.5 Vdc
$20.
INP/4 0 - 10 Vdc
0 - 20 Vdc
-7.5 to 12.5 Vdc
$20.
INP/6 0 - 15 Vdc
0 - 30 Vdc
-12.5 to 17.5 Vdc
$20.
INP/12 0 - 30 Vdc
0 - 60 Vdc
-27.5 to 32.5 Vdc
$20.
INP/24 0 - 60 Vdc
-57.6 to 62.6 Vdc
$20.
INP-124 0 - 20 ma
4 - 20 ma
$15.

Scaling Cables  ·  XR440

Model Configurable Range(s) Price
INP/2 ± 5.0 Vdc
0 - 10 Vdc
$20.
INP/4 0 - 20 Vdc $20.
INP/6 0 - 30 Vdc $20.
INP/12 0 - 60 Vdc $20.
INP-124 0 - 20 ma
4 - 20 ma
$15.

XR440 / INP wiring:
Yellow to Voltage; Green to terminal 1, 2, 3 or 4; Black to C except if INP/2 and ±5 Vdc then Black to E.  Also connect a wire from the source signal's ground to the C terminal.  For scaling values, refer to Pocket Logger Software's Help topic "Input Scaling Module", and use the scaling values listed for the INP model's voltage range shown above.