TRH-100 Temperature & RH Probe
Uses two input channels, one for temperature (dry bulb) and one for % RH, Wet Bulb, or Dew Point (software selectable). May also be used with other data acquisition systems, see electrical specifications for details.
Connect up to two (2) Temperature / RH Probes to the XR440 Data Logger
Connect up to four (4) Temperature / RH Probes to the XR5-SE Data Logger
|RH Accuracy||±3% RH from 0 to 95% RH|
|Stability||±1% RH typ. at 50% RH in 5 years|
(using 12 bit mode if XR440)
±0.15°C from 0 to 40°C (±0.27°F from 32 to 104°F)
±0.3°C from -25 to 85°C (±0.55°F from -13 to 185°F)
|Temperature Sensor Interchangeability||±0.1°C from 0 to 70°C|
|Physical||Rugged housing with sintered stainless steel filter.|
|Probe Size||0.5" dia. x 2.5" long (13mm x 64mm)|
White: 5 Vdc Power
Green: RH Output (~1 to 4 V)
Yellow or Red: Temperature (resistance)
Lo Value: -23.83
Hi Value: 133.39
|Cable diameter||0.165 inch (4.19 mm)|
|Cable conductors||22 AWG stranded copper|
|Model with 1FT leads||24 AWG stranded copper|
|Operating Temperature||-40 to 85°C* (-40 to 185°F)*|
*Continuous use above 70°C (158°F) in high humidity environments (above 70 % RH) is not recommended.
|Part No.||Lead length||Price|
|TRH-100||1 ft (0.3 meter) leads||$205.|
|TRH-100-10FT||10 ft (3 meter) shielded cable||$220.|
|TRH-100-20FT||20 ft (6 meter) shielded cable||$225.|
|TRH-100-50FT||50 ft (15 meter) shielded cable||$240.|
For using the TRH-100 with other data acquisition systems see TRH-100 Electrical Specifications.
The TRH-100 probe has a drift spec of less than 1% RH in 5 years. For calibration information, refer to re-calibrating the TRH-100 Probe.